|
Helping You Make Your Home Your Castle |
|
How to Install a Ceiling MedallionInstalling Ceiling Medallions
Introduction: Ceiling medallions really dress up any room when installed under a light fixture or ceiling fan. The typical ceiling fan or light fixture has a six inch base that attaches to the ceiling support box. Ceiling medallions come in several different sizes from six inches to two feet in diameter. The medallions are installed on the ceiling underneath the ceiling fixture base and give the appearance of an old fashion finished ceiling. Chandeliers really take on a different look when mounted with a ceiling medallion. They are lightweight, easy to install, and look exactly like traditional plaster medallions. Ceiling medallions are installed in the center of the living room ceiling or over the table in the dining room. They can also be used in other areas such as hallways and near entry doors. Installing
a ceiling medallion is quite easy for the DIY
homeowner using common household tools. Follow the
four steps below and you will have a beautifully
finished ceiling with the medallion design of your
choice.
1. Install the medallion in the center of the room or hallway. Measure the same distance from parallel walls and mark the ceiling at the center point. Hold the center of the medallion on the center point and make a light pencil mark around its circumference. 2. Apply adhesive to the back of the medallion by following the manufacturer's recommendations for the type and amount to use. 3. Carefully position the medallion over the alignment marks and push it into place. Rotate it slightly to spread out the adhesive under the medallion. 4. Locate two ceiling joists above the medallion nail the medallion to the ceiling using finishing nails. 5. Set the finish nail heads, fill the holes with putty or cocking compound and paint the medallion. 6. Install the light fixture. That is how to install a ceiling medallion. Related articles:
|
A Great DIY Guide  
|
Home Improvement Plus Perks Copyright©2008